Generate QR code
Open Access
Subscription Access
ГИБРИДНЫЕ МАГНИТНЫЕ ПОДШИПНИКИ. ВИДЫ КОНСТРУКЦИЙ И ПЕРСПЕКТИВЫ РАЗВИТИЯ
Abstract
The problems connected with increased reliability of high-speed electrical systems, including high-speed microturbine generator installations were discussed. The review of foreign constructions of hybrid magnetic bearings that are used to improve the reliability of high-speed generators is presented. Identified their main development trends and prospects of using in various industries. The recommendations on the practical application of hybrid magnetic bearings are given.
About the Authors
Ф. Исмагилов
ФГБОУ ВПО «Уфимский государственный авиационный технический университет»
Russian Federation
Russian Federation
И. Хайруллин
ФГБОУ ВПО «Уфимский государственный авиационный технический университет»
Russian Federation
Russian Federation
В. Вавилов
ФГБОУ ВПО «Уфимский государственный авиационный технический университет»
Russian Federation
Russian Federation
References
1. A. Looser, J. W. Kolar. A Hybrid Bearing Concept for High-Speed Applications Employing Aerodynamic Gas-Bearings and a Self-Sensing Active Magnetic Damper. Proceedings of the 37th Annual Conference of the IEEE Industrial Electronics Society (IECON 2011), Melbourne, Australia, November 7-10, 2011.
2. Minh Nha Pham, Hyeong-Joon Ahn. Experimental optimization of a hybrid foil-magnetic bearing to support a flexible rotor. Mechanical Systems and Signal Processing, Volume 46, Issue 2, 3 June 2014, Pages 361-372.
3. Hooshang Heshmat and David S. Xu. Experimental Investigation of 150 mm Diameter Large Hybrid Foil/Magnetic Bearing. Proceedings of the International Gas Turbine Congress 2003 Tokyo November 2-7, 2003.
4. Bangcheng Han, Shiqiang Zheng Design. Modeling, Fabrication, Backto-Back Test of a Magnetic Bearing System for High-Speed BLDCM Application. Journal of Engineering for Gas Turbines and Power, Volume 137, Issue 11
5. Shanbao Cheng, Steven W. Day Hybrid Magnetic Bearings for Ma Flow Blood Pump. 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Montréal, Canada, July 6-9, 2010.
6. Petzold Ola. Hybrid magnete für einen magnetischgelagerten Rundtisch / O. Petzold. Technische mechanic. - 2006 - Band 26 - Heft 2. - стр. 85 - 86.
7. Thrust Hybrid Magnetic Bearing using Axially Magnetized Ring / Cheol Hoon Park, Sang Kyu Choi, Ji Hoon Ahn, Sang Yong Ham , Soohyun Kim. Magnet Journal of Magnetics 18(3), 302-307 (2013).
8. Устойчивость редкоземельных SmCo магнитов к длительному хранению / Г. П. Станолевич, Н. В. Федосеев, С. А. Тимаков, С. Л. Борисов. Вопросы электромеханики Т. 139. 2014. - С. 29-34.
9. High Temperature Hybrid Radial Magnetic Bearing Systems Capable of Operating up to 538°C (1000°F) / Jinfang Liua, Heeju Choia, Alan Palazzolob, Randall Tuckerb, Andrew Kennyb, Kyung-Dae Kangb, Varun Ghandib, Andrew Provenzac. Proceedings of 20th International Workshop on Rare earth permanent magnets and their applications, Sept. 8-10, 2008, Crete, Greece.
10. Применение бесконтактных подшипников в летательных аппаратах / Ф. Р. Исмагилов, И. Х. Хайруллин, В. Е. Вавилов, А. М. Якупов, В. И. Бекузин. Вестник МАИ. 2014. Т.21. №5. c. 88 - 100.
11. A Low-Profile Design for the Noncontact Ultrasonically Levitated Stage / T. Ide, J. R. Friend, K. Nakamura, S. Ueha. Japanese Journal of Applied Physics, 44:4662, June 2005. 17, 18.
12. A. Minikes, I. Bucher. Comparing numerical and analytical solutions for squeeze-film levitation force // Journal of Fluids and Structures, 22:713 - 719, July 2006. 14, 77.
13. Semsorless Control of Hybrid Magnetic bearings / Вавилов В. Е., Герасин А. А., Исмагилов Ф. Р., Хайруллин И. Х., Гайсин Р. А. Journal of Computer and Systems Sciences International. 2015. Vol. 54. №3. c. 415-423.
14. Application of hybrid magnetic bearings in aviation starter-generators / Исмагилов Ф. Р., Хайруллин И. Х., Гумерова М. Б., Вавилов В. Е. International Review of Electrical Engineering. 2014. Vol. 9, №3. pp. 506-510.
15. Johnson D., Pillay P., Malengret M. High speed PM motor with hybrid magnetic bearing for kinetic energy storage. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), 2001. v. 1. p. 57 - 63.
16. Chi Zhang, King Jet Tseng. Design and control of a novel flywheel energy storage system assisted by hybrid mechanical-magnetic bearings. Mechatronics Volume 23, Issue 3, April 2013, p. 297-309.
17. Lawrence A., Brian T. Murphy, John Kajs. Application of permanent magnet bias magnetic bearings to an energy storage flywheel. Fifth Symposium On Magnetic Suspension Technology 1 December 1 - 3, 1999.
18. Jed Firebaugh Design Options for a Flywheel Energy Storage System. University of Washington 2007.
Review
For citations:
, , . Safety and Reliability of Power Industry. 2016;(1):30-34. (In Russ.)
Views:
546
Email this article 
