Preview

Safety and Reliability of Power Industry

Advanced search
Open Access Open Access  Restricted Access Subscription Access

Methodology for calculating standards for process losses of heat energy and heat carrier, and consumption of electricity during transmission

https://doi.org/10.24223/1999-5555-2023-16-2-87-96

Abstract

A logical and sequential model of calculation of standards of process losses of heat energy and heat carrier, as well as electricity costs during transmission of heat energy in heating networks has been developed and built using MS Excel. The model constitutes a group of files interconnected by links, which allows perceiving the whole group of files as a single program. All the user needs to do is enter the source parameters of the heat network sections, such as length, diameter, year of installation, temperature curve, network operation time, pumping equipment characteristics, network operation temperature schedule, ambient temperature norms in accordance with the region of calculation, and the output will be a ready detailed calculation of all the normal rates. In the process of successive calculation, such normative values as heat energy losses, heat carrier costs, hourly heat energy losses under average annual network operating conditions, annual heat energy losses are determined. Besides, hourly and annual losses of heat carrier with leaks are determined. Power consumption is calculated on the basis of factory and operating parameters of pumping equipment operation. The results of standard calculations are summarized in a consolidated table, where both monthly and annual figures are shown. The procedure makes it possible to considerably decrease the time spent on calculations of normal rates, to make a forecast for heat energy balance, to analyze the dynamics of actual and estimated values. The methodology has been successfully proven, with multiple approvals of standards of process losses of heat energy, heat carrier, and electricity consumption during transmission by the Ministry of Energy of the Russian Federation.

About the Author

S. S. Putilov
EnergoExpert Group LLC
Russian Federation

17/25 Mosfilmovskaya st., 119330, Moscow



References

1. Murtazaeva A. R., Kuznechenko A. M., Bugaeva T. M. Analysis of tariff regulation problems in heat supply // Week of Science of SPbPU: Materials of scientific conference with international participation. Institute of Industrial Management, Economics and Trade. In 3 parts, St. Petersburg, November 18 – 23, 2019. Volume Part 2. – St. Petersburg: Federal State Autonomous Educational Institution of Higher Education "St. Petersburg Polytechnic University of Peter the Great" 2019: 611 – 613. – EDN HXFBLK. (In Russ.)

2. Order of the Ministry of Energy of the Russian Federation of March 21, 2017. N 201 "On Amendments to Order of the Ministry of Energy of the Russian Federation of April 29, 2015 N 258 "On Approval of Administrative Regulations for the Ministry of Energy of the Russian Federation of the State Service to Approve the Standards of Process Losses during Heat and Heat Carrier Transmission through Heating Networks Located in Settlements, Urban Districts with a Population of Five Hundred Thousand or More, as well as in Federal Cities of Moscow and St. Petersburg". (In Russ.)

3. Order of the Ministry of Energy of the Russian Federation of August 10, 2012, No. 377 On the Procedure for Determination of Technological Losses during Heat and Heat Carrier Transmission, Specific Fuel Consumption Rates during Heat Production, Fuel Reserve Rates at Heat Sources (Except for Heat Sources Functioning in Combined Generation of Electric and Thermal Energy), Including for the Purposes of State Regulation of Prices (Tariffs) in Heat Supply. (In Russ.)

4. Andrienko Y. S., Andrienko I. С. Development of an information model for calculating heat losses in the heat supply system // Postulat 2022; 12: 17 – 23. (In Russ.)

5. SP 131.13330.2020 "SNiP 23-01-99 Construction Climatology" // Ministry of Construction of Russia. 2020. (In Russ.)

6. Specification of the pump Grundfos UPS 50-180 F B 28 on the official website of the manufacturer. URL: https://product-selection.grundfos.com/products/ups-series-200/ups-b/ups-50-180-f-b-280-96402142?tab=variant-specifications&pumpsystemid=2104019078 (accessed 17.05.2023).

7. Specification of the Grundfos TP 65-260/2 A-F-A-BAQE pump on the manufacturer's official website. URL: https://product-selection.grundfos.com/products/tp-tpe/tp/tp-65-2602-96087503?tab=variant-specifications&pumpsystemid=2104336688 (accessed 17.05.2023).


Review

For citations:


Putilov S.S. Methodology for calculating standards for process losses of heat energy and heat carrier, and consumption of electricity during transmission. Safety and Reliability of Power Industry. 2023;16(2):87-96. (In Russ.) https://doi.org/10.24223/1999-5555-2023-16-2-87-96

Views: 491


ISSN 1999-5555 (Print)
ISSN 2542-2057 (Online)