Preview

Safety and Reliability of Power Industry

Advanced search
Open Access Open Access  Restricted Access Subscription Access

Determination of the technical state of the stator of electric machines on the basis of measuring the characteristics of partial discharges

Abstract

The article deals with sources and reasons of partial discharges in the stator coil insulation. A data base is created containing typical standards and quantitative parameters of partial discharge specters in electrical machine coils taking into consideration test voltages, ageing time and positions of coil defects.

About the Authors

I. A. Andreev
ОАО «Силовые машины»
Russian Federation


A. M. Andreev
ОАО «Силовые машины»
Russian Federation


Yu. Z. Lyakhovsky
Санкт-Петербургский государственный политехнический университет
Russian Federation


A. E. Monastyrsky
Петербургский энергетический институт повышения квалификации
Russian Federation


References

1. Stone G.R. Electrical Insulation for Rotating Machines / G.R.Stone et al. – J. Wiley INC, 2004. – 370 p.

2. IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery // IEEE SA Standards Board, 2000. – 55 p.

3. IEC 60034-27: Rotating Electrical Machines – Part 27: Partial Discharge Off-line Measurements on the Stator Winding Insulation of Rotating Machinery, 2006. – 44 p.

4. Андреев А.М. Оценка технического состояния электрических двигателей и генераторов на основе анализа частичных разрядов / – А.М. Андреев, А.И. Таджибаев, А.Е. Монастырский. – СПб.: ПЭИПК, 2007. – 97 с.

5. Ваксер Б.Д. Проблемы использования высоковольтной изоляции в статорных обмотках турбогенераторов, работающих в воздушной среде / – Б.Д. Ваксер, В.О. Коган, В.П. Чернявский // Электротехника. 1991. № 7. С. 42 – 47.


Review

For citations:


Andreev I.A., Andreev A.M., Lyakhovsky Yu.Z., Monastyrsky A.E. Determination of the technical state of the stator of electric machines on the basis of measuring the characteristics of partial discharges. Safety and Reliability of Power Industry. 2013;(3(22)):51-54. (In Russ.)

Views: 367


ISSN 1999-5555 (Print)
ISSN 2542-2057 (Online)