Preview

Safety and Reliability of Power Industry

Advanced search
Open Access Open Access  Restricted Access Subscription Access

Undocumented possibilities of parametric methods and models of processes of damage to structural alloys of NPP equipment

Abstract

When any metal intensive equipment for the NPP is designed, requirements of the technical regulations are strictly adhered to. At the same time, structural alloys often fail long before the end of their preset life expectancy. Their time before failure (TBF) is adversely affected by many particular processes of principal and secondary damages. Also, in operating conditions, kinetics of each process is, as a rule, non-linear in time, and is seldom defined by just one meaningful parameter. Besides, significant influence is produced by technical heritage data (first of all, density and structure of dislocations as well as the initial hydrogen concentration). However, regulations contain no recommendations as to equations of growth kinetics of controlled parameters (forecasting methods) and finding numerical values of limit state criteria (LSC), in case of both one or more processes. The article contains a parametrical method for assessment of condition and TBF control of the steel simultaneously exposed to hydrogen attack and fatigue.

About the Author

V. P. Gorbatykh
ФГБОУ ВПО «НИУ «МЭИ»
Russian Federation


References

1. Jose R. Galvelle. Review of stress corrosion cracking. Boletin de la Akademia national de Ciencias, Cordoba, Argentina, Tomo 54, entregas1 – 4, Noviembre de 1980. Цитируется по: технический перевод №1567/4Б Бюро переводов Моск. Отд. Торгово-промышленной палаты СССР, М. 1984 г.

2. Справочная серия. «Правила и нормы в атомной энергетике». Нормы расчета на прочность оборудования и трубопроводов атомных энергетических установок. ПНАЭ Г-7-002-86. М. Энергоатомиздат, 1989 г., 525

3. Аркадов Г.В., Гетман А.Ф., Родионов А.Н.. Надежность оборудования и трубопроводов АЭС и оптимизация их жизненного цикла (вероятностные методы). М., Энергоатомиздат, 2010 г., 424 с.

4. Аркадов Г.В., Павелко В.И., Финкель Б.М. Системы диагностирования ВВЭР. М., Энергоатомиздат, 2010 г., 393 с.

5. ОСТ 108.901.01-79. Металлы. Методы испытаний на коррозионное растрескивание. Применительно к атомной и тепловой энергетике. М.: Госстандарты, 1979 г.

6. Нормативно-методологические требования к управлению ресурсными характеристиками элементов энергоблоков АС, РД ЭО 0039-95

7. Горбатых В.П., Иванов С.О. Дислокационно-водородная модель коррозионного растрескивания под напряжением. «Надежность и безопасность энергетики», №2 (17) 2012 г., с. 50 – 54.

8. Об учете частных процессов повреждения в методике оценки ресурса корпуса реактора по критерию нейтронной хрупкости / В.П. Горбатых, С.О. Иванов, А.Ю. Банник и др. // «Новое в Российской электроэнергетике» №5, 2009 г., с.18 – 31.

9. Горбатых В.П. Начала коррозиологии. Изд. Дом МЭИ. Вестник МЭИ 2006 г., № 5, с. 11 – 16.


Review

For citations:


Gorbatykh V.P. Undocumented possibilities of parametric methods and models of processes of damage to structural alloys of NPP equipment. Safety and Reliability of Power Industry. 2013;(2(21)):28-33. (In Russ.)

Views: 462


ISSN 1999-5555 (Print)
ISSN 2542-2057 (Online)